Intelligent rail type temperature transmitter
Product description:
; intelligent rail temperature transmitter
HX-RS-DBW4011 is a universal input into a rail intelligent temperature transmitter, can accept a variety of signal types, industrial process control including: thermocouple, thermal resistance, resistance, mA, voltage signal isolation output is 4 ~ 20mA standard signal, great to simplify the number of on-site equipment installation and maintenance and spare parts, realizes the industrial field of flexible rapid response.
- support: input type thermocouple, thermal resistance, resistance, mV, mA, V
- thermocouple, thermal resistance sensor fuse alarm
- low temperature drift, automatic zero calibration of
- output 4 ~ 20mA current signal
- distribution limiting protection, current limiting value 30mA
- current input overcurrent protection, overcurrent limit the design of 50mA
- backplane redundant power supply interface, to ensure the reliable operation of the system
[input type] universal input.
thermocouple (K, E, S, B, R, J, T, N),
thermal resistance (PT100, PT200, PT500, PT1000, Cu50),
resistor (0~400, 0~4000), mV (-80 ~ +80mV). Distribution: 26V -
... 18V / 4... Response time: (0 - 20mA
... 90%, 100%... 10%)
temperature channel voltage and current signal: Q 0.4S
: Q 0.4S
- signal of voltage and current power supply: 24VDC + 10%
- Q - 1W
power consumption: ambient temperature: -40 ~
85 degrees of humidity: Q95% RH (non condensing)
test and calibration of temperature pressure between 25 - 2 DEG C
- power input and output terminals: R2500VAC
[
] - output current output range: 4 ~ 20mADC
- maximum output current limit: 30mA
- Programming: alarm output signal of 4 ~ 20mA/20 ~ 4mA
- fault: 3.5mA/23mA programmable
- Q load capacity: 350 ohm
resistance and
resistance [input] - detection current: Q 0.3mA
- lead resistance: Q 15 Omega
- resistance alarm circuit:
[input] -
built-in thermocouple cold junction compensation error: Q + 1 C
- external cold end compensation: Cu50
- thermocouple fuse alarm:
- thermocouple fuse current detection: 0.2uA
[mV]
input measurement range: -80 ~ 80mV
. Range: -80 ~ 80mV in arbitrary
- input impedance: 10M [
]
ohm current input - measuring range: 0 ~ 20mADC
- range: 0 ~ 20mADC choose
- lost Input resistance: 20 + PTC 50
LED indicates Changliang said electricity and normal flash thermocouple or thermal fusing error
dimensions 113 x 109 x 17.5mm
installation DIN35 standard
standard
EN61326:1997+A1:1998+A2:2001+A3:2003
EN61010-1:2001
CE guide rail type installation
Product
