Air duct type temperature and humidity transmitter
Product description:
Product number
HX-RS-WS301
Product name
Air duct type temperature and humidity transmitter
Product description
The duct type temperature and humidity transmitter adopts imported humidity sensor, and the temperature part adopts imported platinum resistor Pt100 as temperature sensing element. As required, threaded mounting, movable flange mounting, and in-line mounting are available.
Product features
The utility model has the advantages of good consistency, long service life, fast response, small temperature coefficient, wide range precision, good stability, small annual drift, complete calibration output of the transmitter and interchangeable use without calibration;
technical parameter
Operating power: 24VAC;
Measuring range: temperature 0~50 DEG C, 0~80 DEG C; -20 to 60 DEG C, -40 to 80 DEG C; humidity: 10% to 95% RH;
The temperature precision: - 0.2 DEG c;
Signal output range: 0 to 100% RH;
Response time: typical value < 5S;
Long term stability: typical values 0.5%RH/ years;
Load capacity: voltage: more than 1K omega; current type: 0 ~ 500;
Working environment humidity: 5 ~ 95%RH, without condensation; temperature: -40 ~ 80 degrees centigrade;
Measuring stability: humidity measurements usually drift less than 1%RH;
Transmitter material: ABS plastic waterproof shell;
Weight: no less than 200g;
Probe protection: Copper burning netting;
Installation: pipe type (screw thread installation, movable flange fixed installation, straight in type without fixed installation).
Product selection
HX-RS-WS301
output signal
1 (4~20 mA) (three wire); 2 (0~10 mA); 3 (0~20 mA); 4 (4~20 mA) (two wire);
5 (0~5 VDC); 6 (0~10 VDC); 7 (0~1 VDC);
temperature range
1 (0~50 DEG C); 2 (0~80 DEG C); 3 (-20 to 60 DEG C); 4 (-40 to 80 DEG C);
Humidity accuracy
1 + 2%; 2, + 3%
Field display
0, no; 1, LCD LCD display;
Installation method
Zero
In-line
Unfixed
One
Thread fixation
M20*1.5, M27*2.0
Two
Flange fixing
Center hole spacing: 48mm
Insertion depth
1, (150mm), 2, (200mm), 3, (300mm), 4, designated by the customer
Product legend
Reference example
Outline structure drawing
Product application
Air duct type temperature and humidity transmitter is very suitable for measuring temperature and humidity in various places, such as wind, smoke pipe, airtight container, air inlet and outlet of central air conditioner.
Typical applications
The other measuring range and insert length please indicate the shortest insert length is 130mm, the insertion depth of up to several meters, can be used to measure the temperature and humidity of flue gas pipeline, kiln fired brick, ceramics etc. in the. For details download, click: http://www.bjhxrs.com.cn/cn/dow.asp, id=58
Product
